Please wait while the page loads...

How much does it cost to get the engine light checked?

The check engine light warns of issues ranging from a gas cap that's not properly tightened to a more serious failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it good to get the appropriate code reading and diagnosis. The average cost for a check engine light diagnosis & testing is ordinarily between $88 and $111. The good news, Courtesy Chrysler Jeep Dodge Ram offers entirely complimentary multi-point inspections and free diagnostics, in most cases, to support determine the cause of your check engine light.

2014 RAM ProMaster 2500 Check Engine Light Flashing

Although there are countless potential causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are several common causes including something as simple as a loose gas cap. Other often common reasons for a Check Engine Light are faulty head gasket, damaged emissions control part, a malfunction with the fuel injection system, damaged oxygen sensor, dirty mass airflow sensor, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the RAM Certified Mechanics and the certified service protocol to isolate the root problem and utterly repair it as necessary to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your RAM issue was completely fixed.

Every 2014 RAM ProMaster 2500 was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its vital systems. The rapid sensors are continually detecting conditions while sending essential data to the electronic control unit. If the electronic control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, unfortunately that is the limitation of the Check Engine Light – it won't tell you what exactly is wrong nor what to do about it. That's where we come in; Courtesy Chrysler Jeep Dodge Ram provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Exceptionally Knowledgeable Service professional.

How many miles can you drive with the check engine light?

The safest bet is to decipher the code and then plan your strategy accordingly. If you check engine light is flashing, we propose that you pull over and contact Courtesy Chrysler Jeep Dodge Ram to assist determine if your vehicle is safe to drive in or if we propose a tow truck. It could be anything from a bad sensor to plug wires needing to be replaced. Since any check engine code has its own level of severity, it is generally difficult to predict how multiple miles you can be safe in driving with the warning light on.

What could cause the check engine light to come on in a 2014 RAM ProMaster 2500?

When your check engine light comes on, this could be as simple as tightening or replacing your gas cap. Likewise, the check engine light could likewise be a warning of a serious problem that could cause serious damage to your engine and come with a hefty and pricey repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady and continuous glow usually means something less serious but a flashing check engine light indicates that your vehicle's engine is in serious trouble and useful service is required promptly. If your check engine light is flashing in your 2014 RAM ProMaster 2500, we very propose not to drive the vehicle and schedule RAM service today. Below is a list of the most typical reasons your check engine light can come on:

  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, known as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns more immediately and your vehicle will be less efficient when it comes to fuel economy. So what occurs if I don't replace your O2 sensor? A damaged sensor can not only affect your miles per gallon, but it can cause significant damage to your catalytic converter and your 2014 RAM ProMaster 2500's spark plugs. The O2 sensor sends data to the vehicle's onboard computer to determine the absolutely correct combination of air and fuel that enters the cylinders in your engine. A damaged O2 sensor can still cause a car to fail an emissions test.
  • Your 2014 RAM ProMaster 2500 has a vacuum leak. Every RAM ProMaster 2500 has a vacuum system that performs a wide variety of functions. The vacuum system still helps lower adverse emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, exceptionally if they're exposed to intense heat or extreme cold.
  • Your catalytic converter is bad or going bad. The catalytic converter is a part of your 2014 RAM ProMaster 2500's exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is frequently caused by regularly neglected maintenance, which is why Courtesy Chrysler Jeep Dodge Ram offers a free multi-point inspection with every RAM service. If you have an issue with your catalytic converter and don't get it repaired, your 2014 RAM ProMaster 2500 will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause other delicate problems from overheating.
  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your RAM ProMaster 2500 is what determines how much fuel is required to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to certain changes, like altitude. If your RAM ProMaster 2500 is having trouble starting, idling rough or has a sudden fast change in the position of the throttle pedal, this could be a critical sign of a damaged mass airflow sensor.
  • Issues with any aftermarket items. An aftermarket alarm, exhaust or other item can wreak extreme havoc on your 2014 RAM ProMaster 2500 if it's not installed correctly. These aftermarket parts and accessories can drain the battery, trigger the check engine light, or even limit the vehicle from starting. If these issues sound familiar, bring your ProMaster 2500 to RAM and have our team of gifted certified mechanics ensure that your aftermarket items were installed perfectly and aren't causing any issue. Getting accessories, exceptionally aftermarket parts and accessories, or using OEM parts first place might cost a little bit more but could assist you save considerably from having to get poor work and damage caused by poor installation work corrected.
  • The battery is low or dead. The battery in your 2014 RAM ProMaster 2500 is every important. Without a car battery, your car won't start, light up the road in front, play the radio or charge your phone. Today's car batteries last much longer than they did a few decades ago, and they don't absolutely require maintenance. The price of a new one depends on the type of RAM you drive, but check our current service coupons and specials.
  • New Spark Plugs or Plug Wires are required for your 2014 RAM ProMaster 2500. The spark plugs are the part of your engine that ignites the air/fuel combination in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run smooth. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or old, you will experience a evident poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause blocked catalytic converter or damage to ignition coils and O2 sensors, leading to more costly repairs.
  • One of the most regular and frequent cause is that your 2014 RAM ProMaster 2500 gas cap is loose, damaged or missing. The gas cap for your 2014 RAM ProMaster 2500 serves multiple purposes. It prevents unpredictable gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What occurs if you have a damaged fuel cap? If your gas cap is old or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump and be more expensive. Luckily, to replace a gas cap isn't costly. If your check engine light turns on promptly after you put gas in your 2014 RAM ProMaster 2500, first thing you should check is to make sure the cap isn't loose — or that it's still on your car's roof or at the fuel pump.

What Does the Check Engine Light Mean?

One of the most normally misunderstood lights or indicators in your 2014 RAM ProMaster 2500 is the check engine light. The check engine light is part of the important onboard diagnostics system, and displays in a variety of different ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a variety of things for your 2014 RAM ProMaster 2500. Some of these essential duties include ignition timing, shifting automatic transmissions controlling engine speed, and implementing stability control, just to name a few. With that being said, the check engine light can mean a wide range of different things. It can be as simple as your gas cap being loose or as perilous as engine knocking. If your check engine light is on in your 2014 RAM ProMaster 2500, contact Courtesy Chrysler Jeep Dodge Ram. Our RAM service department can help you find out what code is turning your check engine light on or diagnose why your check engine light is flashing. Contact Courtesy Chrysler Jeep Dodge Ram today!

Will the check engine light reset itself?

The check engine light on your 2014 RAM ProMaster 2500 will normally shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will promptly turn itself off. Still, if your catalytic converter is working perfectly, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2014 RAM ProMaster 2500 light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to bring it in to Courtesy Chrysler Jeep Dodge Ram so the light and code can be double-checked and reset.

2014 RAM ProMaster 2500 Check Engine Light Codes

The check engine light turning on can be quite intimidating, particularly to see that little light on your vehicle's dashboard suddenly illuminate, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, likewise known as the OBD (on-board computer diagnostic system) in your ProMaster 2500. There are hundreds of different codes that your check engine light can properly represent. While that sounds daunting, with a little patience, tackling basic diagnostics will give you advantageous knowledge about your vehicle and will likewise allow that essential Check Engine Light to do what it is absolutely supposed to do: be your guide. Unfortunately, obvious and useful vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of likely OBD codes, there are likewise hundreds of likely reasons for the light, including:

  • Transmission issues
  • Computer output circuit issues
  • Emissions controls issues
  • Fuel and air metering systems problems
  • Bad Spark Plugs
  • Old Battery
  • Loose Gas Cap or Missing Gas Cap
  • Ignition system faults
  • O2 Sensor

This is why it is essential for someone who does not have a lot of prevalent automotive knowledge to not assume what a code means. If the engine light comes on due to a serious concern, you risk damaging your vehicle further by not repairing the issue right away. Call Courtesy Chrysler Jeep Dodge Ram at 8136948784 today or schedule your check engine light service online today! When your check engine light comes on, you should get it checked out quickly by a adept certified RAM mechanic.

2014 RAM ProMaster 2500 Check Engine Light

If the check engine light in your 2014 RAM ProMaster 2500 starts flashing, that means that the problem needs attention swiftly and your RAM should be brought in expeditiously. A flashing light indicates that the problem is very serious and if not taken care of swiftly may result in considerable and serious damage to the vehicle. This blinking light normally reveals a severe engine misfire allowing unburned fuel to be dumped into the exhaust system. There it can expeditiously raise the temperature of the catalytic converter to a point where damage is likely, requiring an expensive and huge repair. Some owners ask if spark plugs cause the check engine light to flash? This can explicitly be the cause. A broken, old or dirty spark plug can cause the engine to misfire. If your check engine light is consistently flashing, please contact our team of automotive experts at Courtesy Chrysler Jeep Dodge Ram instantly by calling 8136948784. If the problem is entirely ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very costly repair.

Check Engine Light Service 2014 RAM ProMaster 2500

What do you do when you're driving along in your RAM ProMaster 2500 and suddenly, a yellow light illuminates on your dash and says "Check Engine". If you're like most RAM owners, your heart sinks extremely because you may have exactly idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep, calm breath and realize the light coming on doesn't mean you have to pull the car over to the side of the road and call a tow truck, but it is advised that you get your 2014 RAM ProMaster 2500 checked promptly. Ignoring that warning could end up causing major, considerable damage to pricey engine components.

When your 2014 RAM ProMaster 2500's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can't appropriate, a computer turns on your check engine light. This amber or yellow light is usually labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that can expeditiously identify the issue, whether it's a sensor or a failing engine part. This code is read with an electronic scan tool that is used by our RAM auto repair mechanics at Courtesy Chrysler Jeep Dodge Ram. There are also a number of comparatively inexpensive code readers that are designed for do-it-yourselfers, should you choose that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced professional to determine the absolutely right issue and repair it.

Is it safe to drive your 2014 RAM ProMaster 2500 with the check engine light on?

This question is not very simple because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to drive. This is generally indicated by a steady glow of the check engine light. If you notice a difference in the performance of the car, it could be an indication of a more serious problem. If the check engine light is flashing, this means that there is a serious issue and it is suggested to service your RAM ProMaster 2500 promptly. Call the experts at Courtesy Chrysler Jeep Dodge Ram by dialing 8136948784 so you can describe the issues. Or reduce your speed and bring your 2014 RAM to our certified mechanics as soon as imaginable.